With the rapid development of the construction industry nowadays, concrete mixing plants are more and more widely used in the market, and they are a good helper for construction workers. In order to use concrete mixing plants better, you must be careful during operation and avoid Small detail problems lead to problems, unavailability, and the gain is not worth the loss. Today, I will show you the performance characteristics and detailed operation of the concrete mixing plant.

1. Operation Rules of Concrete Batching Plant

• Check before using the concrete mixing plant: press the switch before powering on, and then close the switch to check whether the operation is sensitive. Is it normal for vibrator, roller operation, and material stick operation? The winding of the wire rope on the drum; the lifting of the gangue platform, etc. is it normal? If shortcomings are found, notify the mechanical and electrical team for handling. It can be used after handling.

• 2. Do not load too much at one time, load the material according to the ratio, pay attention to the water-cement ratio. Stir evenly, and the mixing time should not be less than one minute at a time. Normally mixed concrete should be very thick porridge.

• The driver should be familiar with the effect principle of each operating system, and stop the machine for inspection immediately if the shortcoming is found.

• The electrical parts should be maintained, and the cables should be well maintained to prevent damage.

• The concrete mixer should be leveled, and no one should stand under the funnel of the mixer to prevent hurting people when the funnel is falling and running water.

• When temporarily stopping the track, you should be punctual (every 20 minutes), start the mixer to prevent the concrete from condensing or pour out the concrete in the drum, and flush the drum with water.

• After the concrete is irrigated and shut down, the roller and the mortar outside the machine should be washed and cleaned with water in time. The feeding hopper is cleaned up every shift so that the feeding material falls to the party's standard position when it is lowered, and a layer of oil is applied to the surface for next use.

•  Carry out the principle of handover carefully, and explain and understand the working conditions of the machine at work and matters needing attention.

  
  

2.Performance characteristics of concrete mixing plant

• High-quality, energy-saving, and environmentally friendly concrete mixing towers (stations) provide a strong guarantee for green high-performance concrete production.

• The closed green environmental protection sand weighing and conveying system minimizes noise pollution to the environment.

• The negative pressure bag pulse dust removal system completely solves the problems of dust flying and environmental pollution in concrete production, effectively saving energy and protecting the environment.

• The wet concrete separation and recycling equipment adopts a three-dimensional arrangement to form a set of closed sewage treatment and sand and stone recycling systems, so that all slurry and waste materials are recycled and reused, achieving zero discharge, minimizing environmental pollution, and truly saving energy. , Environmentally friendly and comfortable production.

• High-precision weighing system, weighing, control, signal conversion components are selected from world-renowned brands, high-precision sensors, imported microcomputer control, stable weighing performance of various materials, and accurate measurement.

• The screw conveyor specially designed for powder conveying and the blades with variable pitch design have high conveying efficiency. Pneumatic butterfly valve, tightly sealed, reliable action, water and liquid additives are both coarse and precise weighing methods, with high weighing accuracy.